How to assemble the suspended floor of a basketball court?

The assembly of the suspended floor of the basketball court is actually very simple, because the size of the basketball court is fixed, the standard, as long as the ground is cement ground, to ensure the flatness of the ground, it can be constructed, if it is a new venue, it can be made of cement Let's take a look at the grass-roots treatment and ensure the grass-roots level of the basketball court. The following editor will introduce the steps of assembling the suspended floor of the basketball court!

Tools/Materials:

Box ruler, rubber hammer, double-sided tape, scissors, special ink, brushes, stadium design drawings, markers;

First of all, we determine whether there is a basketball hoop on the venue. If there is a basketball hoop, the suspended floor should be installed with the basketball hoop as the center, measure the distance with a box ruler, and lay it on the left and right sides. If there is no basketball hoop, use a box ruler to measure the reservation, and use Mark the position of the basketball hoop with a marker;

The assembly of the suspended floor of the basketball court is actually very simple. There is no complex graphic assembly. Only in the 3-second area of the basketball court, the color will be different from the color of the entire court (generally, the color in the 3-second area is red suspended floor). The specifications of the suspended assembled floor are basically 25cm*25cm, each box is basically 10 square meters, and each floor is 8 pieces of spliced floors, which saves a lot of time in the assembly process. Place the floating floor at the marked position, connect the buckles, and lock them by hitting with a rubber hammer.

When splicing, pay attention to the position of the 3-second area of the suspended floor of the basketball court on the drawing and the number of suspended and assembled floors in the 3-second area (the number of suspended and assembled floors must be within the 3-second area). Remember to install the rounded corners.

The last step is to watch the basketball court suspension drawing and determine the size of the basketball court line (length: 28 meters; width: 15 meters; line width: 0.05 meters; middle circle: radius 1.8 meters; three-point line: 6.75 meters; free throw line: from the end line The inner edge to its outermost edge is 5.80 meters, and the length is 3.60 meters; the three-second area: a rectangle of 4.90 meters × 5.80 meters; reasonable collision area: draw a 1.25-meter semi-circle from the center of the landing of the basket; 0.45 meters, up to 0.457 meters; the height of the basket: 3.05 meters; the height of the lower edge of the backboard above the ground: 2.90 meters), use double-sided tape to coil the basketball court, apply the special ink with a brush, and wait for the ink to dry. Remove the double-sided tape, so that the suspended floor of the basketball court is assembled.

Matters needing attention: Remember to install the edge strips and rounded corners of the suspended floor of the basketball court. When drawing the line of the basketball court, be sure to wait for the ink to dry before tearing off the double-sided tape!