What are the maintenance methods of PVC plastic floor?
When Yichen Xiaobian visited customers, he found that many customers used PVC plastic floors as marbles and tiles. They did not pay much attention to the maintenance of PVC plastic floors, resulting in damage and pollution of PVC plastic floors. question. So what should we pay attention to when using PVC plastic floor? How to maintain and maintain PVC plastic floor? What are the maintenance methods of PVC plastic floor? Below I will explain it in detail for you:
1. Sand and gravel protection: A sand and gravel protective mat should be placed at the door of the room and hall where PVC plastic floors are used to prevent shoes from bringing sand and gravel into the room and scratching the floor surface;
2. Item handling protection: When handling items, especially when there are sharp metal items at the bottom, do not drag on the floor to prevent the floor from being injured;
3. Pyrotechnic protection: Although the PVC plastic floor is a fire-resistant floor (B1 level), it does not mean that the floor will not be burned by fireworks. Therefore, when people use the PVC plastic floor, do not put burning cigarette butts, mosquito coils, etc. Electric irons and high-temperature metal objects are placed directly on the floor to prevent floor damage
4. Regular floor maintenance: Use neutral detergents to clean PVC plastic floors. Do not use strong acid or strong alkali detergents to clean the floor, and do regular cleaning and maintenance work;
a. Routine maintenance: use a clean 90% dry mop to clean the ground, and partially clean those with serious pollution;
b. Monthly maintenance: clean the ground and wax the ground with damaged parts of the foundation. In particular, the homogeneous PVC plastic floor is generally treated and maintained by waxing the floor once a month;
5. Pollution treatment: The ink, food, greasy, etc. stained on the PVC plastic floor should be wiped off, and then the traces should be scrubbed with diluted detergent. Pour the rosin perfume on the floor to clean it, and after scrubbing, it needs to be waxed and maintained;
6. Matters needing attention: Do not use cleaning balls, knives to clean the floor, and the dirt that cannot be cleaned by conventional methods, consult relevant people, and do not use acetone, toluene, and other chemicals indiscriminately;
7. Chemical protection: Avoid a large amount of water staying on the floor surface for a long time, especially the tile floor and homogeneous floor. Water soaking the floor for a long time may penetrate into the floor and cause the floor to melt and lose its cohesion. The water layer of the protective wax on the floor surface causes floor pollution, and it is also possible that sewage penetrates into the interior of the floor and causes the floor to discolor (homogeneous floor);
8. Sun protection: avoid direct exposure to strong light, and expose the floor to ultraviolet rays to prevent the floor from discoloring and fading.
一、Purpose of cleaning and maintenance
1. Improve appearance: Remove the dirt produced in daily use in time, so that the elastic floor can fully show its extraordinary appearance and natural gloss.
2. Protect floors: Keep resilient floors free from accidental chemicals, cigarette butts, shoe prints, oil and water, etc., minimize mechanical wear on the surface, and maximize the durability of the floor itself, thereby extending the life of the floor life.
3. Convenient care: Due to the tight surface structure and special treatment of the elastic floor itself, paying attention to daily cleaning and maintenance can make the floor easier to care for and prolong its service life.
二、Nursing precautions
1. All kinds of dirt on the ground should be removed in time.
2. It is absolutely forbidden to soak the floor in open water. Although some floors use waterproof glue to cut off the water source (such as floor drains, water rooms, etc.), long-term soaking in water will seriously affect the service life of the floor. During the cleaning process, use a water suction machine to suck up the sewage in time.
3. For places with more people and more wear and tear, the maintenance cycle should be shortened and the number of waxing times of high-strength surface wax should be increased.
4. It is absolutely forbidden to use hard and rough cleaning utensils (such as steel balls, scouring pads, etc.) to prevent sharp objects from hitting the elastic floor.
5. It is strongly recommended to place rubbing mats at the entrance of public places with high traffic flow to prevent dirt, sand, etc. from being brought in to stain and scratch the floor.
三、 different stages of maintenance methods:
(一) Cleaning and maintenance after the floor is laid/before use
1. First remove the dust and debris on the floor surface.
2. Use a mop with 3M red abrasive discs or similar products to clean at low speed (diluted with 1:20 strong universal cleaner and added to the mop) to remove the protective wax, grease, dust and other dirt on the floor surface. The machine sucks up the sewage.
3. Wash with clean water and blot dry.
4. Apply 1-2 layers of high-strength topping wax as needed. Cleaner: strong general-purpose cleaner, high-strength wax, tool: ground grinder, red grinding sheet, water absorber, wax dragging water press
(二) Daily cleaning and maintenance
1. Push or vacuum. (Put the mop dust remover on the mop, and then push the dust after drying.)
2. Wet mop. (Dilute the floor cleaning and polishing agent with water at a ratio of 1:20, and use a semi-wet mop to mop the floor.) If necessary, you can also use a floor mop with low-speed cleaning. Cleaner: mop and pull dust agent, floor cleaning polisher Tool: dust push mop
(三) Regular cleaning and maintenance
1. Push or vacuum.
2. The floor cleaning and polishing agent is diluted with water at 1:20, mopping or grinding with a high-speed polishing machine and a red abrasive sheet.
3. Apply 1-2 layers of high-strength face wax.
4. If necessary, it can be polished with a high-speed polishing machine and a white polishing pad. Cleaner: floor cleaning and polishing agent high-strength surface wax Tools: dust-push grinder red, white grinding sheet water absorber wax drag water press
(四) Thorough renovation
1. Push or vacuum.
2. Dilute with 1:10 strong dewaxing water and spread it evenly on the ground, wait for 5-10 minutes, then use a floor scrubber to add red abrasive discs to clean and remove wax at low speed. Immediately suck up the sewage with a water suction machine.
3. Rinse with clean water and blot dry until there is no residue of cleaner left on the floor.
4. Apply 1-2 layers of high-strength topping wax as needed. Cleaner: floor cleaning and polishing agent high-strength surface wax Tools: dust-push grinder red, white grinding sheet water absorber wax drag water press
(五) Treatment of special dirt
1. Oil stains: For local oil stains, pour the water-based degreaser stock solution directly on the towel and wipe it; for large-area oil stains, dilute the Vitex water-based degreaser at 1:10, and clean it with a mop and red abrasive disc at low speed.
2. Black offset printing: Polish with spray cleaning wax, high-speed polishing machine and white polishing pad. For long-term black offset printing, you can directly pour the strong black offset printing remover on the towel and wipe it.
3. Glue or chewing gum: Use a professional strong glue remover directly on the towel and wipe off. Cleaning agent: water-based degreaser spray cleaning maintenance wax strong black offset remover strong glue remover.